An expandable list showing the "RS232 DF1" driver and the PLCs connected to the computer will be displayed.Ĭlick the "RS232 DF1" driver and then click on "Set project path." This will save the information of the serial driver and the path to the PLC in the RSLogix software. In the "Project" section, click on "Communications, Who active." This option is similar to the "RSWho" button in the RSLinx Classic Lite software. Click on "File, New Controller" and choose from the displayed drop-down list the model of the Allen Bradley Micrologix PLC that you want to connect to. Launch the RSLogix software while the RSLinx Classic Lite software is still running. Using RSLogix Software to Communicate with the PLC The PLC that is connected using the serial communications cable to the computer is automatically listed. The driver "RS232 DF1" will be displayed in this list.ĭouble-click on the driver to expand a sub-list that displays all the PLCs that are connected to the computer. This will open an expandable list that displays all the active communication drivers. Click on "Close" to accept these settings and close the configuration window for the RS232 driver.Ĭlick on "RSWho" button on the "Tool" bar menu. Choose the default values for the "COM Port," "Baud," "Partiy," "Stop Bits" and "Protocol" sections. Once connected, a USB driver is automatically created in RSLinx Classic. Another button called "Add" will become enabled on the "Configure Driver" window.Ĭlick on "Add" to open the window for configuring the RS232 driver. With RSLinx Classic open, connect your computer to a controller or communications module using a USB cable. Click on the "Available Driver Types" drop-down list button and choose "RS232 DF1" from the displayed list.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |